Morphy Richards 46718 - Cleaning Your Multifunction Opener

5
4
Clean the Multi Tool (8) and Grip & Grab Tool
(1) with a damp cloth.
3
Clean the Cutting Assembly with warm soapy
water.
2
Slide the Cutting Release Button (2) and remove
the Cutting Assembly (3) from the Main Unit.
1
Unplug the multifunction opener from the
mains.
6
Align the alignment arrows on the Cutting
Assembly (3) and Main Unit.
5
Clean the main unit with a damp cloth.
DO NOT IMMERSE IN WATER
7
Slide the Cutting Release Button (2) and
replace the Cutting Assembly into the main unit.
8
Replace the Mutli Tool (1) and Grip & Grab Tool
(8) onto the main unit for storage.
Cleaning your multifunction
opener
46718 rev2_Layout 1 02/09/2011 12:14 Page 5