5
Features
(1) Lid
(2) Lid Release Button
(3) Spout
(4) Handle
(5) Water Level Indicator
(6) On/Off Switch
(7) 360˚ Cordless Base
(8) Cord Storage (underneath)
(9) BRITA MAXTRA Filter Cartridge (one supplied)
(10) BRITA Hopper
(11) BRITA Memo
(12) Start Button
(13) Time Gauge
(14) Operational Indicator
(15) Power Connector
Using your filter kettle
1
Fill the kettle with water, do not fill past the MAX line. Do not fill
through the Spout (3). The kettle will start filtering the water.
2
Place the kettle on the Cordless Base (7), and press the On/Off
Switch (6). You can boil water while the kettle is still filtering the
water.
3
When boiled, the kettle will automatically switch off. Remove from
the Cordless Base (7).
4
Pour the water from the kettle.
CAUTION: Will be hot.
Before first use
• Before using the appliance for the first time, fill with water, boil,
and pour away.
Using filter cartridges
• Filtering your water improves the taste and appearance of
beverages by reducing limescale, lead, chlorine and other
impurities.
• The unique BRITA MAXTRA Filter Cartridge (9) offers improved
filtration due to MAXTRA technology. The natural Micropore Filter
in combination with the powerful Protect Filter reduces chlorine
and limescale for a great natural taste and permanently absorbs
metals such as lead, copper and aluminium for your wellbeing.
• To ensure the water is filtered, fill through the Lid, do not fill the
filter kettle through the Spout (3).
For information or advice on using BRITA MAXTRA or BRITA
Memo, please call BRITA Customer Care on 0844 742 4800
When to replace the BRITA cartridge
• This depends on water quality and the improvement required. We
recommend that you change your cartridge after 4 weeks.
• The electronic reminder on your Morphy Richards water filter
kettle will remind you when to change your cartridge.
• BRITA Filter Cartridges conform to the highest quality standards.
Raw materials and final products are subject to stringent internal
and external controls. BRITA Filter Cartridges are steam sterilised.
An independent institute certifies the food grade quality of BRITA
water filters and cartridges.
Great taste, less waste:
The BRITA MAXTRA Filter Cartridge is 100% recyclable. Please
contact BRITA customer care team for advice on recycling
schemes on 0844 742 4800, or visit www.brita.co.uk/recycle
Replacing the filter cartridge
5
Immerse the BRITA MAXTRA Filter Cartridge (9) in water. Shake
gently to remove any air bubbles.
6
Push the Filter Cartridge into the BRITA Hopper (10) until firmly in
place. The Filter Cartridge should stay in place if the kettle is
upside down.
7
Fill the kettle to the MAX line as normal and allow to filter through
completely to flush the cartridge. Repeat twice
8
Your Filter Cartridge is ready for use.
BRITA Memo
• For maximum filter performance and for optimum taste, it is
important to change your BRITA MAXTRA Filter Cartridge (9)
regularly. BRITA recommends that you replace the cartridge every
4 weeks.
The unique BRITA Memo (11) measures the recommended time of
use of your cartridge. The BRITA Memo is located on the filter
kettle handle.
Setting the BRITA Memo
9
• To start BRITA Memo, please press and hold down the Start
Button (12) until all four bars appear in the display and flash twice.
The BRITA Memo is now set.
• The Operational Indicator (14) in the bottom right corner of the
BRITA Memo indicates that it is working.
• Every week, one bar will disappear on the Time Gauge (13) to
show the remaining cartridge life. After four weeks, all four bars
will disappear and a flashing arrow will indicate that the cartridge
should now be changed. Insert a new cartridge according to the
instructions, and reactivate the Memo.
g
g
To Next Page
