Morphy Richards ELIPTA - Operating the Coffee Maker; Using your coffee maker

3
3
Plug the coffee maker into the mains.
2
Ensure the On/Off Switch (9) and Control Knob
(2) are set to Off. Select Coffee (7).
11
Fill the Water Tank (5) and place into the coffee
maker.
7
Turn the Control Knob (2) slowly to Coffee to
begin brewing.
6
Slide the On/Off Switch (9) to on. The Power Indicator
Light
(8) illuminates. The Temperature Indicator Light
(6) will turn off when the coffee maker is ready.
55
Insert the Filter Holder into the Brewing Head (4)
turning anti-clockwise until it locks fully into place.
Place your cup(s) under the Coffee Dispenser (15).
4
Place the relevant Filter (12) or (13) into the Filter
Holder (14). Fill with espresso coffee and tamp
with Tamping Spoon (16), or use an E.S.E. pod.
Using your coffee maker
8
To stop turn the Control Knob to Off. Remove
the Filter Holder and clean.
CM47150MUK rev3_Layout 1 02/09/2011 14:12 Page 3