GrimeBuster steam cleaner
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your
new cleaner...
No steam
• Check the power supply.
• Check the steam switch is set to the on position.
WARNING: If the cleaner has been boiled dry it must be
switched off for a few minutes to allow the safety cut-out
to reset.
• Check water is in the tank.
• The cleaner may need descaling. We recommend the use of
filtered water to reduce the scale.
(In hard water areas the cleaner will require regular descaling.
Follow the instructions on page 8.)
Please study all instructions carefully before use.
This product is also supplied with a user guide CD ROM.
To Next Page
Need help?
General
