EasyManua.ls Logo

Morphy Richards Kettle - Electrical Requirements; Voltage Check; Immersion and Earthing Warnings

Morphy Richards Kettle
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
has been damaged in any
manner. Contact Morphy
Richards for advice.
The use of attachments or tools
not recommended or sold by
Morphy Richards, may cause
fire, electric shock or injury.
Do not attempt to connect any
other appliance to the base unit
or this appliance to another
base unit.
Do not tamper with the
connector in any way.
Do not use the appliance for any
use other than to boil water.
Do not place the appliance on
or near a hot gas or electric
burner or in a heated oven.
The appliance must not be on
the base unit when being filled
with water.
The mains lead of the cordless
base cannot be repaired. If the
mains lead is damaged, the
cordless base should be
discarded and replaced. Contact
the helpline for advice.
Unplug from the outlet when not
in use.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
WARNING: The appliance
must not be immersed
for cleaning.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This
appliance must be
earthed.
FEATURES
Lid
¤ Lid knob
Spout filter
Concealed element
360°connector
Cordless base unit
Cord storage
· On/off switch
Power on neon
Water level indicator
Quiet boil element
 Whistle on/off switch
¤
·
Â
43690 rev1 6/3/07 12:49 Page 5

Related product manuals