Morphy Richards Total Control Instruction Manual

9
g
p
f
i
q
}
∂
d
Before First Use
• Carefully unpack your Table Blender as the Blending Blades are
very sharp.
• Remove any stickers (except for the serial label on the base of the
product).
• Carefully wash the Jug, Lid and Measuring Cup in hot soapy
water. Rinse and dry.
• Wipe over the Base Unit with a damp cloth.
• WARNING: Never immerse the Base Unit in water or in any
other liquid. Always ensure the electrical connections are
kept dry. This may be wiped with a clean, damp cloth.
Using Your Total Control Table Blender -
Manual Control
1 Place the Plastic Jug (5) onto the Base Unit (7).
2 Place the food or cold liquids into the Plastic Jug (5). Do not
exceed more than the recommended amount.
3 Place the Lid (2) on the Plastic Jug (5), pushing down firmly.
Place the Measuring Cup (1) into place twisting clockwise to lock
into place. To avoid spillages ensure the pouring hole in the Lid (2)
is turned away from the Spout (4).
4 Plug the Total Control Table Blender into the mains socket &
switch on (16).
5 Turn the Control Dial (8) to 1 to start blending. Increase the speed
as required.
6 To use the Pulse function (9) turn the Control Dial (8) to P. Do not
use for prolonged periods of time.
7 Switch off (16) and unplug from the mains socket before serving.
8 Remove the Plastic Jug (5) from the Base Unit (7).
9 To pour, remove the Lid (2) and pour out of the spout (4) .
10 To use the flow control lift Lid (2) and reposition as required below.
11 Turn to the large filter in the Lid (2) for a full flow.
12 Turn to the gridded filter in the Lid (2) to prevent any large pieces
from flowing through if present.
Using the preset programs
13 Place the Plastic Jug (5) onto the Base Unit (7).
14 Place the food or cold liquids into the Plastic Jug (5). Do not
exceed more than the recommended amount.
15 Place the Lid (2) on the Plastic Jug (5),
pushing down firmly. Place the Measuring Cup (1) into place
twisting clockwise to lock into place.
16 To avoid spillages ensure the pouring hole in the Lid (2) is turned
away from the Spout (4). Plug the Total Control Table Blender into
the mains socket & switch on (16).
17 Select Dips & Sauces button (11) on the Preset Programs for
smooth dips, sauces, batters and icecream. A blue light will come
on around the button, this light will stay on until the program is
complete. PLEASE NOTE: The program may pause for several
seconds. Do not remove the Plastic Jug (5) or Lid (2) until the light
has gone off.
WARNING: DO NOT ADD INGREDIENTS OR REMOVE THE LID
WHILST THE PROGRAMME IS RUNNING.
18 Select Smoothies button (12) on the Preset Programs for delicious
healthy smoothies. A blue light will come on around the button,
this light will stay on until the program is complete. PLEASE
NOTE: The program may pause for several seconds. Do not
remove the Plastic Jug (5) or Lid (2) until the light has gone off.
19 Select Ice Crushing button (13) on the Preset Programs for
flavoured slushies. A blue light will come on around the button,
this light will stay on until the program is complete. PLEASE
NOTE: The program may pause for several seconds. Do not
remove the Plastic Jug (5) or Lid (2) until the light has gone off.
20 Select Soup & Sauces button (14) on the Preset Programs for
nutritious soups and sauces. A blue light will come on around the
button, this light will stay on until the program is complete.
PLEASE NOTE: The program may pause for several seconds. Do
not remove the Plastic Jug (5) or Lid (2) until the light has gone
off.
21 Switch off (16) and unplug from the mains socket before serving.
22 Remove the Plastic Jug (5) from the Base Unit (7).
23 To pour, remove the Lid (2) and pour out of the Spout (4) .
24 To use the flow control lift Lid (2) and reposition as required below.
25 Turn to the large filter in the Lid (2) for a full flow.
26 Turn to the gridded filter in the Lid (2) to prevent any large pieces
from flowing through if present.
IMPORTANT
DO NOT ADD BOILING WATER/VERY HOT LIQUID TO THE
JUG. ALLOW TO COOL FIRST.
Measuring Cup
• The Measuring Cup (1) can be used to measure small quantities
of liquid.
1 Pour the liquid through the Pouring Hole (3) in the Lid (2).
2 Place the Measuring Cup (1) back in the Lid (2), twisting to
lock/unlock. Then proceed with your blending.
Crushing Ice
• Follow the procedure in the ‘Using your Total Control Table
Blender section, replacing food with the ice cubes to be crushed.
• Select Ice Crushing Button (13) on the Preset Programs.
• Note: The maximum capacity for ice crushing at any one time is
500ml.
Top Tips
Use your Blender for soups, sauces, drinks, pates, mayonnaise,
dressing etc.
• Do not put dry ingredients into the Blender without addition of
other wet ingredients or liquid.
• When blending, pour the liquids in first and then add the solid
food. Begin blending at the lower speed and increase when
needed.
IMPORTANT: To ensure the long life of your blender when using
FP403040MEE Rev1.qxp_Morphy Richards Instruction Book 11/07/2016 17:38 Page 9

Morphy Richards Total Control Specifications

General

Type	Immersion blender
Product color	White
Removable bowl	Yes
Country of origin	China
Bowl capacity	0.75 L
Number of speeds	8
Power source	AC
Package depth	260 mm
Package width	250 mm
Package height	246 mm
Package weight	2280 g
Pallet height	1726 mm
Pallet weight	153920 g
Quantity per pallet	48 pc(s)
Quantity per pallet layer	16 pc(s)
Number of layers per pallet	3 pc(s)
Number of cartons per pallet	12 pc(s)
Number of cartons per pallet layer	4 pc(s)

Weight and Dimensions

Depth	65 mm
Height	390 mm
Weight	1719 g