EasyManuals Logo

Morphy Richards Total Control Instruction Manual

Morphy Richards Total Control
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
the Manual Speed Settings never run it for longer than 60
seconds and allow to cool for 5 minutes. Switch off as soon as
you have reached the desired consistency.
The machine will not work if the Plastic Jug (5) is fitted incorrectly.
Don’t use the Plastic Jug as a storage container. Keep it empty
when not in use.
Never blend more than 1 litre (1 3⁄4 pints) - of frothy liquids, such
as milk shakes.
If using a max of 1.5L do not use any higher than speed 2.
When blending soup do not fill over the
1 Litre mark.
Do not overfill the blender. This could cause
damage to the motor. The plug fuse will blow if the blender is
overloaded. Replace the fuse and do not exceed the maximum
recommended volumes. Refer to the ‘Operating chart’.
Care And Cleaning
Before cleaning and maintenance, switch the appliance off and
unplug it, remove the Plastic Jug (5) from the Base Unit (7).
After use, fill the Plastic Jug (5) with 1L (13⁄4 pints) of warm water
and run for 30 seconds on the pulse setting and repeat as
necessary. Never use abrasives or cream cleaners.
Clean the Base Unit (7) with a damp cloth or kitchen paper roll.
There is a facility to wrap your power cable around the base of the
product and fit the plug into the Plug Storage (15).
Reassemble the Total Control Table Blender by carefully placing
the Plastic Jug (5) on the Base Unit (7), ensuring it fits correctly.
WARNING : Never immerse the Base Unit in water.
WARNING: If any liquid is spilt in the top of the Base Unit,
switch off and unplug from the socket and dry with a cloth.
Operating Chart
Volume Speed (Manual) Time Hints
Preset or Manual
Soups* 1L 1-4+ pulse 15 seconds to 1 minute max Begin with low speed and
increase to high if required
Milkshakes 1L 1-5+ pulse 15 seconds to 1 minute
Blending / 1.5L 1-2 pulse 15 seconds to 1 minute Begin with low speed and
liquidizing increase to high if required
(purees, drinks, batters)
Crushing ice 500ml max pulse 10-20 seconds
Do not process for longer than recommended time.
Do not exceed recommended maximum volumes.
* Do not add boiling water and very hot liquids to the Plastic Jug, allow to cool first.
Preset programs running times
Dips & Sauces - 44 Seconds
Smoothies - 54 Seconds
Soups & Sauces - 58 Seconds
Ice Crush - 20 Seconds
FP403040MEE Rev1.qxp_Morphy Richards Instruction Book 11/07/2016 17:38 Page 10

Other manuals for Morphy Richards Total Control

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Morphy Richards Total Control and is the answer not in the manual?

Morphy Richards Total Control Specifications

General IconGeneral
TypeImmersion blender
Product colorWhite
Removable bowlYes
Country of originChina
Bowl capacity0.75 L
Number of speeds8
Power sourceAC
Package depth260 mm
Package width250 mm
Package height246 mm
Package weight2280 g
Pallet height1726 mm
Pallet weight153920 g
Quantity per pallet48 pc(s)
Quantity per pallet layer16 pc(s)
Number of layers per pallet3 pc(s)
Number of cartons per pallet12 pc(s)
Number of cartons per pallet layer4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth65 mm
Height390 mm
Weight1719 g

Related product manuals