Morris MDE-2417 - User Manual

Starts or stops the appliance. The POWER indicator lights up when pressed.

Selects fan speed (HIGH/LOW) and operating modes (AUTO, FAN). Indicators light up accordingly.

Shows humidity level with color changes; can be turned on/off by pressing the LAMP key.

Controls louver movement direction: 45/90 degrees, or universal.

Activates anion generation for air purification, promoting fresh air.

Activates UV light for sterilization purposes.

Allows selection of desired relative humidity level; affects compressor operation.

Programs delayed power-on or power-off functions within a 0-24 hour range.

Instructions for removing and emptying the water tank when the indicator is on.

How to connect a PVC pipe for continuous water drainage via the drain port.

Steps for cleaning or replacing the air filter to maintain effectiveness.

Visual guide on proper handling, cleaning methods, and what to avoid.

Table listing error codes (E1-E6) and their corresponding sensor faults.

Common issues and step-by-step checks for resolution.

Information on proper disposal of electrical equipment for recycling.

Product compliance with EU directives and relevant technical norms.