Morris Pro Series - User Manual

Questions and Answers

H
hillbrendaAug 16, 2025
Why does my Morris Pro take so long to dry?
- J
  Johnathan TorresAug 16, 2025
  A long drying time in your Morris Dryer can be due to several factors. The lint filter or heat exchanger might be clogged, so try washing the filter with lukewarm water or cleaning the heat exchanger. Also, make sure the ventilation grills are open to prevent the room from overheating, and clean the humidity sensor if there's limescale. Avoid overloading the dryer and ensure your laundry is spun at a higher speed in your washing machine.
K
Kaitlin JonesAug 19, 2025
What to do if my Morris Dryer won't start?
- K
  Kyle LopezAug 19, 2025
  If your Morris Dryer won't start, first ensure it's properly plugged into the socket and that the loading door is fully closed. Check that you've set a program and that the dryer isn't in Standby (Pause) mode. Also, verify whether the child lock is active and deactivate it if necessary. If there was a power failure, press the Start/Pause key to resume the program.
J
Joseph McculloughAug 22, 2025
Why is my laundry still damp after using my Morris Dryer?
- P
  Patricia WatersAug 22, 2025
  If your laundry is damp after drying in your Morris Dryer, several factors could be the cause. The laundry might feel more humid if it's hot. Ensure that the program you selected is appropriate for the type of laundry you're drying by checking the care labels and using time programs if needed. Also, a clogged lint filter or heat exchanger can cause this issue, so wash the filter with lukewarm water and clean the heat exchanger. Avoid overloading the dryer and ensure your laundry is spun at a higher speed in your washing machine before drying.
O
omosesAug 25, 2025
How to fix the water tank warning symbol on my Morris Pro?
- R
  Rebecca YoungAug 26, 2025
  If the water tank warning symbol is on or flashing on your Morris Dryer, it could mean that the water tank is full; therefore, you should empty it. If your dryer is connected directly to a water outlet, make sure the water discharge hose isn't bent.
T
thompsonkylieAug 28, 2025
How do I turn off the filter cleaning warning symbol on my Morris Dryer?
- T
  Tyler FoxAug 28, 2025
  To address the filter cleaning warning symbol on your Morris Dryer, start by cleaning the lint filter. Also, the filter seat may be clogged by lint, so clean the filter seat. If there's a layer obstructing the surface of the lint filter, wash the filter with lukewarm water.
M
Michele StevensAug 31, 2025
Why are my clothes shrinking in my Morris Pro Dryer?
- M
  Michael SpencerAug 31, 2025
  Clothes may shrink, felt, or deteriorate in your Morris Dryer if the selected program isn't suitable for the type of laundry. Check the care labels on your laundry items and choose an appropriate program.
S
scottjuarezSep 3, 2025
What does it mean when the heat exchanger cleaning warning symbol is on in my Morris Dryer?
- C
  Corey JarvisSep 3, 2025
  If the heat exchanger cleaning warning symbol is illuminated on your Morris Dryer, it indicates that the heat exchanger might be unclean. Clean the heat exchanger to resolve this.
J
Jennifer LesterSep 6, 2025
What should I do if the filter and heat exchanger cleaning warning symbols are flashing on my Morris Pro Dryer?
- J
  Jennifer FrazierSep 6, 2025
  If the filter and heat exchanger cleaning warning symbols are flashing on your Morris Dryer, it indicates that the filter seat might be clogged by lint, there might be a layer that causes obstruction on the surface of the lint filter, or the heat exchanger might be clogged. Clean the filter seat, wash the filter with lukewarm water, and clean the heat exchanger.
V
vrobinsonSep 9, 2025
Why is water leaking from the loading door of my Morris Dryer?
- H
  Heather BennettSep 9, 2025
  Water may leak from the loading door of your Morris Dryer if lint has accumulated on the inner surfaces of the loading door and on the surfaces of the gasket. Clean these surfaces to resolve the issue.
K
Kathryn AndersonSep 12, 2025
What to do if the program can not be started and the filter warning led is blinking on my Morris Pro?
- G
  gardnerkathleenSep 12, 2025
  If the program can not be started and the filter warning led is blinking on your Morris Dryer, make sure the filter is placed. Replace the filter.