Morris WBW-61055/2 - User Manual

Questions and Answers

H
Heather SilvaAug 16, 2025
What to do if my Morris Washing machine displays error IE?
- D
  David GardnerAug 16, 2025
  If the Morris Washing machine displays the error message 'IE', it could be due to several reasons: * The water tap might be closed. Ensure it is open. * The filter of the valve inlet could be clogged. Try cleaning it. * There might be an issue with the valve inlet itself, the water level sensor, the drain motor, or the PCB ASS’Y. In such cases, consider changing the respective part.
K
Kristen EstesAug 19, 2025
What to do if my Morris WBW-61055/2 Washing machine displays error OE?
- S
  Stephen ScottAug 19, 2025
  If your Morris washing machine displays the error message 'OE', this could indicate a problem with draining. Here's what you can check: * The drain hose may be kinked or clogged. Clean and straighten it. * There might be an issue with the drain motor, the valve inlet, the water level sensor, or the PCB ASS’Y. In these cases, consider changing the affected part.
D
Debra SmithAug 22, 2025
Why is my Morris WBW-61055/2 not draining?
- M
  Michael PearsonAug 22, 2025
  If your Morris washing machine isn't draining, the issue might be a kinked or clogged drain hose. Straighten and clean the drain hose. Also, the pump filter could be clogged, so clean the pump filter as well.
K
Kenneth CunninghamAug 25, 2025
Why won't my Morris WBW-61055/2 Washing machine program start?
- D
  David HallAug 26, 2025
  If your Morris washing machine program doesn't start, here are a few things to check: * Make sure the plug is securely inserted. * If there was a power failure, the program should resume when power returns. * Ensure the loading door is properly closed and that no laundry is trapped. * Verify that you've selected a program and pressed the Start/Hold button.
B
Bryan HendersonAug 27, 2025
How to reduce noise and vibration in my Morris Washing machine?
- S
  Susan SmithAug 27, 2025
  If your Morris Washing machine is making serious noise and vibrating a lot, it could be due to a few reasons: * The transit bolts might not have been removed. Remove them. * The washing machine might be installed on an uneven floor. Reinstall it on an even surface. * The washing machine may not be leveled. Adjust the level using the adjustable legs.
C
caldwellrichardAug 30, 2025
Why is my Morris WBW-61055/2 not spinning correctly?
- V
  Vicki KlineAug 30, 2025
  If your Morris washing machine isn't spinning properly, it could be due to having too little laundry. Add more laundry to balance the load and repeat the spin cycle. Alternatively, the laundry might be unbalanced. Rearrange the laundry inside the drum and try the spin cycle again. Note that heavy clothing items may cause the washing machine to skip or stop the spin cycle.
M
Mary MaciasSep 2, 2025
Why is water not entering my Morris WBW-61055/2 Washing machine?
- Y
  Yvette CherrySep 2, 2025
  If water isn't entering your Morris washing machine, check these things: * Make sure the water tap is turned on. * Check if the inlet hose is kinked or folded and straighten it. * The filters in the water inlet filter may be blocked. Clean them.
C
Chad HopkinsSep 4, 2025
What to do if foam comes out of the detergent case of my Morris WBW-61055/2 Washing machine?
- A
  Andrew HorneSep 5, 2025
  If foam is coming out of the detergent case of your Morris washing machine, it's likely that too much or unsuitable detergent was used. To resolve this, repeat the Rinse cycle.
J
johnsonbillySep 7, 2025
Why is the spin result unsatisfactory on my Morris WBW-61055/2 Washing machine?
- M
  Melissa WadeSep 7, 2025
  If the spin result of your Morris washing machine is unsatisfactory, it might be because the drain hose is placed over 1 meter above the floor. Place the drain hose under 1 meter above the floor.
T
Tina RichardsonSep 10, 2025
What does error UE mean on my Morris WBW-61055/2 Washing machine?
- K
  kristinstewartSep 10, 2025
  If your Morris Washing machine displays the error message 'UE', it means the laundry is concentrated to one side of the drum during spin. To fix this, rearrange the laundry.

Morris WBW-61055/2 Specifications

General

Loading Type	Front Load
Capacity	6 kg
Spin Speed	1000 rpm
Energy Rating	A+++
Number of Programs	15
Color	White

Morris WBW-61055/2 - User Manual

Table of Contents

Questions and Answers

Morris WBW-61055/2 Specifications