Morrison BC260 SS User Manual

Morrison BC260 SS

33 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

www.morrisonoutdoor.com

Morrison Combination Unit

BC260 SS & Attachments

Owner’s Manual

Important

Please read these instructions carefully before assembly, to reduce risk of ﬁre, burn hazard or other injury.

Keep these instructions in a safe place for future use.

This manual covers the Morrison BC260 SS Combination Unit and attachments.

Part N

o

: 555732

Revised May 2016

Table of Contents

Questions and Answers:

S
Steven StanleyJul 31, 2025
How to fix a Morrison BC260 SS Trimmer that won't start?
- W
  wilsonkennethJul 31, 2025
  If your Morrison Trimmer engine won't start, it might be due to several reasons. First, ensure the stop switch is in the START position. Second, the fuel may have deteriorated or is of poor quality, so use fresh fuel of the correct grade. Third, the carburetor could be flooded; if so, turn the choke lever to the position opposite the START position and pull the recoil starter cord repeatedly. Also, the muffler exhaust pipe opening might be blocked; remove any deposited carbon using a screwdriver or similar tool. Lastly, the spark plug electrodes might be fouled, so clean them or replace the spark plug.
J
Jennifer JacksonAug 4, 2025
Why does my Morrison BC260 SS Trimmer engine not accelerate?
- H
  hfergusonAug 4, 2025
  If your Morrison Trimmer engine doesn't accelerate, the issue could be due to deteriorated or poor-quality fuel. Try using fresh fuel of the correct grade. Alternatively, the muffler exhaust pipe opening might be blocked. In that case, remove the deposited carbon from the muffler using a screwdriver or another appropriate tool.
J
joshuaandersonAug 8, 2025
What to do if the Morrison BC260 SS Trimmer cutting blade keeps rotating after releasing the throttle?
- D
  David SanchezAug 8, 2025
  If the cutting blade of your Morrison Trimmer continues to rotate after releasing the throttle trigger, it could be that the idle speed is too high. Adjust the idle speed using the idle-speed adjuster on the carburetor. Another possibility is that the throttle linkage has little or no play, so you should adjust the play on the throttle linkage.
W
williamrossAug 12, 2025
What to do if my Morrison BC260 SS engine stalls when releasing the throttle?
- D
  David ArnoldAug 13, 2025
  If your Morrison Trimmer engine stalls when you release the throttle trigger, the idle speed might be too low. To fix this, adjust the idle speed with the idle-speed adjuster on the carburetor.
R
Rebecca HortonAug 17, 2025
Why does my Morrison BC260 SS make abnormal noises or vibrate?
- B
  briansimpsonAug 17, 2025
  If you experience abnormal noise or vibration with your Morrison Trimmer, first check if the blade or nylon trimmer is improperly installed and reinstall if necessary. Next, verify that the cutting attachment guard or handle is correctly installed and reinstall if needed. Finally, inspect the clamping screws and retighten them if they are loose.

Morrison BC260 SS Specifications

General

Brand	Morrison
Model	BC260 SS
Category	Trimmer
Language	English

Summary

About This Manual

Meaning of Pictographs

Explains safety and operational symbols used throughout the manual.

Morrison Brushcutter

Technical Data

Provides detailed specifications for the brushcutter attachment.

Names of Parts

Identifies and labels all external components of the brushcutter unit.

Safety Instructions

Essential safety guidelines and warnings for brushcutter operation.

Ensuring Safe Operation

Procedures and practices for operating the brushcutter safely.

Morrison Hedge Trimmer

Technical Data

Provides detailed specifications for the hedge trimmer attachment.

Names of Parts

Identifies and labels all external components of the hedge trimmer unit.

Safety Instructions

Essential safety guidelines and warnings for hedge trimmer operation.

Ensuring Safe Operation

Procedures and practices for operating the hedge trimmer safely.

Morrison Pruner Saw

Technical Data

Provides detailed specifications for the pruner saw attachment.

Names of Parts

Identifies and labels all external components of the pruner saw unit.

Safety Instructions

Essential safety guidelines and warnings for pruner saw operation.

Ensuring Safe Operation

Procedures and practices for operating the pruner saw safely.

Morrison Edger

Technical Data

Provides detailed specifications for the edger attachment.

Names of Parts

Identifies and labels all external components of the edger unit.

Safety Instructions

Essential safety guidelines and warnings for edger operation.

Ensuring Safe Operation

Procedures and practices for operating the edger safely.

Morrison Cultivator

Technical Data

Provides detailed specifications for the cultivator attachment.

Names of Parts

Identifies and labels all external components of the cultivator unit.

Safety Instructions

Essential safety guidelines and warnings for cultivator operation.

Ensuring Safe Operation

Procedures and practices for operating the cultivator safely.

Related product manuals

Preview: Morrison BC 325 S2

Morrison BC 325 S2

Morrison BC 260 S2

Morrison BC 260B S2

Morrison BC 230B S2