To Next PageTo Next Page
Need help?Do you have a question about the Morrison MCS25 and is the answer not in the manual?
Read the manual and express warranty before use. Warranty does not cover misuse.
Explains symbols for warnings, protection, operation, and controls like choke, brake, and kill switch.
Identifies symbols for fuel and oil tank caps and chain oil adjuster nut.
Illustrates symbols for H, L, and T carburetor adjustment screws.
Defines user age limits, safe operation for wood only, and general safety rules.
Covers user condition, work environment, and essential gear like PPE and tools.
Precautions for handling fuel including avoiding heat, no smoking, and safe filling practices.
Ensures a clear work area, secure footing, retreat path, and exclusion of bystanders/animals.
Inspect machine, ensure proper grip and body positioning during operation.
Covers safe handling, avoiding hazards, and transporting the chainsaw.
Understand kickback causes and methods to prevent it, like firm grip and clear area.
Diagram of parts and instructions for assembling the guide bar and saw chain.
Steps for attaching the guide bar and saw chain, including tension adjustment.
Details recommended fuel/oil mixture ratios and types of chain oil.
Procedure for mixing fuel and oil and safely filling the fuel tank.
Instructions for starting engine on different models and allowing it to warm up.
Tips for engine life and what to avoid regarding fuel and usage.
Procedure for stopping the engine and adjusting the chain oil flow.
Steps for adjusting carburetor settings (H, L needles, idle speed) for optimal performance.
Guidance on sawing logs, bucking, limbing, and cutting limbs safely.
Steps for felling a tree, including preparation, notch cuts, and felling cuts.
How the chain brake works, how to check it, and precautions for its use.
Ensuring chain brake effectiveness and sharp chain for kickback safety.
Safety steps before maintenance and daily checks like air filter, oiling port, and guide bar.
Regular checks for cylinder fins, spark plug, sprocket, fuel filter, oil filter, and anti-vibration system.
Key indicators for chain sharpening and cutter setting standards for performance.
Steps for securing the chain and filing cutters with correct angles and depth gauge.
Rounding front edges and ensuring consistent cutter length for safety.
How to check guide bar for wear, flip it for even wear, and identify when replacement is needed.
Diagnosing and resolving issues when the engine fails to start, covering common causes.
Addressing low power output, rough running, and engine knocking by checking components and fuel.
Resolving problems like poor acceleration, engine stopping abruptly, and excessive vibration.
Troubleshooting steps for when the chain oiler is not dispensing oil correctly.
Detailed specifications for different models including dimensions, engine, and capacities.
Information on carburetor type, ignition system, and fuel tank details.
Specifications for guide bar sizes and saw chain types, pitch, and gauge.
Provides company address, contact phone numbers, and copyright notice.
General
