EasyManua.ls Logo

Morso 2B Standard User Manual

Morso 2B Standard
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
1
MORSØ JERNSTØBERI A/S . DK-7900 NYKØBING MORS
E-Mail: stoves@morsoe.com · Website: www.morsoe.com
Distributed by: MORSO US LLC
1011 Highway 52 West - Portland TN - 37148 - USA
Installation and Operating Instructions
2B Standard
For use in North America
Read this entire manual before you install and use your new room heater. If this room
heater is not properly installed, a house fire may result. To reduce the risk of fire, follow
the installation instructions. Failure to follow instructions may result in property damage,
bodily injury, or even death.
Contact local building officials about restrictions and installation/inspection-requirements
in your area.
Save these instructions

Other manuals for Morso 2B Standard

Question and Answer IconNeed help?

Do you have a question about the Morso 2B Standard and is the answer not in the manual?

Morso 2B Standard Specifications

General IconGeneral
ModelMorso 2B Standard
CategoryIndoor Fireplace
RadiantYes
ConvectionYes
Weight165 lbs
Log Length18 inches
Flue Outlet Diameter6 inches
Efficiency75%
Fuel TypeWood
Flue Diameter6 inches
Heating CapacityUp to 1, 000 sq ft
Width500 mm

Summary

Installation of your Morsø stove

Unpacking the stove

Safely unpack the stove, remove packaging, and attach legs.

Checking loose parts in the stove

Verify fire bricks are secure and the air control operates freely.

The chimney / flue system

Requirements for flue system security, appliance connection, and chimney types.

Flue Connection

Guidelines for connecting the chimney connector to the stove and flue system.

Connection to the existing chimney

Details on using chimney connectors, avoiding combustible materials, and proper routing.

Positioning the stove

Specifies required distances to combustible materials and non-combustibles for safe placement.

Operation

Before you start firing

Guidelines on fuel selection, preparation, and initial firing for paint curing.

Lighting and loading intervals

Step-by-step instructions for starting a fire, reloading, and air control settings.

Maintenance

Exterior maintenance

How to clean and maintain the stove's painted exterior surface.

Internal maintenance

Procedures for cleaning the glass and replacing it if damaged.

Cleaning the Stove and the Flue

Routine cleaning of the stove interior, flue, and proper ash disposal to prevent fires.

Leaving the stove for extended periods

Instructions for preparing the stove for periods of non-use to prevent moisture damage.

Parts diagram

Visual representation of stove components for identification.

Parts list

A detailed list of all stove parts with corresponding numbers.

Related product manuals