Morso 6148 B - Page 29

TEST REPORT
Report no.:
300-ELAB-2381-EPA
Page 1 of 25
Init.: JSA/MGJN
Order no.: 847607
No. of appendices: 29 (CBI report)
No. of appendices: 26 (non-CBI report)
Requested by:
Company: Morsø Jernstøberi A/S
Address: Furvej 19
Postcode/town: DK-7900 Nykøbing Mors
Country: Denmark
Email: info@morsoe.com
Web: www.morsoe.com
Product:
Wood stove Type: Morsø 6140B
Sample:
Receipt at DTI, Aarhus: 15. February 2019
Test period:
Date of testing: 20-21 February 2019
Procedure
Testing of solid fuel appliance in accordance with DTI method “ELAB-PP-BR-15”
based on a relevant selection of standards and methods:
ASTM E2515-11
Yes
ASTM E3053-17 (Cordwood)
Yes
US EPA Method 28R in combination with ASTM E2780-10 (Cribwood)
No
CSA B415.1-10
Yes
EPA Communication on alternative method for Cordwood testing
Yes
Result:
The stove/ meets the requirements of NSPS §40 CFR Part 60.
Remarks:
See paragraph 2 - Remarks.
Terms:
Accredited testing was carried out in compliance with international requirements, and the
general terms and conditions of The Danish Technological Institute. The test results apply to
the tested products only. This test report may be reproduced in extract only if the laboratory
has approved the extract in writing. Danish Technological Institute is Notified Body with
identification number 1235 and DIN Certco test laboratory, PL 168.
Issued:
06.09.2019, Danish Technological Institute, Aarhus, Stoves&Boiler test lab
Signature:
Jes Sig Andersen Morten Gottlieb Warming-Jespersen
Senior Specialist Quality Assurance
Test reg. no. 300
Teknologiparken
Kongsvang Allé 29
DK-8000 Aarhus C
+45 72 20 20 00
info@dti.dk
www.dti.dk