3. Light the fire. An ember bed will quickly be
formed by lighting with firestarters, Morsø
kindling bags or 7-10 pieces of twisted
paper under the dry kindling wood.
Step-by-step procedure
1. The air supply must be fully open. Move the
control lever to the right position
2. For lighting the fire use 3-5 pounds of dry
kindling wood.
4. After lighting, partially close the door,
leaving it open an inch or two to allow in
plenty of combustion air.
5. When the chimney is warm after about
5-10 minutes, the door should be closed.
CAUTION: DO NOT BUILD THE FIRE TO CLOSE TO THE GLASS
To Next Page
Loading...
