3
Basic Configuration
Notice of Basic Configuration
1
. For general application purpose (Such as conversation between
SIP extensions, conversation between SIP extensions and MOSA
devices, ISR call service), the parameter is configured in advance
You only need to setup IP address, My phone number and change
your real IP/Phone ID and configure this machine to pass through
NAT, and then you are able to use this device
2
. For other advanced application purpose (such as SIP IP PBX
advanced function, Integration with other MOSA
advanced/value-added application), please refer to the user
manual in attached CD.
3
. For some reason, you reset this machine and all data is lost, you
may refer to Appendix C and the description of this manual to
configure it back again.
4
. The description of this guide is based on small size model,
Firmware 1.06.3, Server Mode. Earlier version has more complex
installation procedure. Please upgrade firmware before starting
configuration.
Note: Standard size model is phased out and upgrade is not possible.
To Next Page