Need help?Do you have a question about the Mosaic Palette 3 Pro and is the answer not in the manual?
Guide to importing or creating style profiles for slicer settings.
Connecting Palette 3 to the internet via Wi-Fi or Ethernet for updates and linking.
Logging into Canvas and using an activation code to establish the connection.
Creating a new printer profile and setting up a project in Canvas.
Integrating Palette 3 into a setup and uploading 3D model files.
Steps for checking for new firmware releases and updating via Wi-Fi or USB.
Diagnosing and resolving common splice problems like brittle, necking, or bulging splices.
Step-by-step guide for adjusting the loading offset when it is incorrect.
Guide for editing HM when it is 'None' or requires adjustment.
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Number of Filaments | 4 |
| Multi-material Printing | Yes |
| Layer Resolution | 50 - 300 microns |
| Filament Compatibility | PLA, ABS, PETG, Nylon |
| Connectivity | USB, Wi-Fi |
| Display | Touchscreen |
| Supported Materials | PLA, ABS, PETG, Nylon |
| Power Requirements | 100-240V |
To Next Page
