How to Use the Safety Steam Button: (
Show as the following picture
LOCKED—Right: UNLOCKED)
LOCKED UNLOCKED
Using the Device
1. Connect the power cord
. The power indicator shines while the boiler is heating up.
2. The boiler is heated up and ready to be used when the power
3. Disengage the safety lock and press the steam button to emit steam.
4. After use, turn off the device by disconnecting the power cord.
5. Let the device cool downbefore stowing it away.
Maintenance and Care
Caution! Thermal burn hazard!
Pull the power plug and let the device cool down completely before maintaining or
cleaning the device.
Cleaning the device
Use a soft, damp cloth with a mild detergent to clean the casing of the device.
Remove sediments from the boiler by shaking
them out with some water.
8
Show as the following picture
s (Left:
. The power indicator shines while the boiler is heating up.
Pull the power plug and let the device cool down completely before maintaining or
Use a soft, damp cloth with a mild detergent to clean the casing of the device.
them out with some water.
To Next Page
Loading...