Need help?Do you have a question about the Moseley Starlink SL9003Q and is the answer not in the manual?
General| Brand | Moseley |
|---|---|
| Model | Starlink SL9003Q |
| Category | Transmitter |
| Language | English |
Detailed technical specifications for the SL9003Q system.
Table detailing bit rate, threshold, and bandwidth for SL9003Q variations.
Technical specifications for the SL9003Q transmitter.
Technical specifications for the SL9003Q receiver.
Specifications for the SL9003Q audio encoder.
Specifications for the SL9003Q audio decoder.
Specifications for the SL9003Q intelligent multiplexer.
Procedure for setting the transmitter power-up state.
Defines typical default module settings and parameters for system setup.
Details on QAM modulator/demodulator parameters.
Procedure to check transmitter performance parameters.
Procedure to check receiver performance parameters.
Description of rear panel connections for power and data.
Guidance for performing back-to-back system tests.
Procedure for RF bench testing the system.
Procedure for bench testing audio and data channels.
Considerations for proper site installation.
Information regarding the antenna and feed system.
Procedure for testing the transmitter antenna connection.
Steps for accurately aligning antennas for optimal performance.
Description of front panel controls, LCD display, and indicators.
Explanation of the function of front panel LED status indicators.
Details on navigating the SL9003Q's menu system.
View of topics, functions, and manual locations for screen summaries.
Guidance for using factory calibration menus for service.
Details on system alarms and faults, with nominal and trip values.
Summary of modem status screens for QAM.
Interpretation of BER, Pre-BER, and #Errors for receiver status.
Displays status information for the transmitter.
Displays status information for the receiver.
Controls for transmitter radiating functions.
Controls for receiver attenuation and signal level.
Configuration options for QAM modem settings.
Configuration settings for the transmitter's frequency.
Configuration settings for the receiver's frequency.
Description of the audio encoder and decoder modules.
Details on the QAM modulator/demodulator card.
Details on the IF upconverter/downconverter card.
Information required for technical support calls.
Arrangements and procedures for factory service.
Guidance and precautions for performing field repairs.
General evaluation and feasibility study of a radio path.
Configuration of the front-end attenuator for interference.
Method for assessing interference at the STL receiver.
To Next Page
