EasyManua.ls Logo

Motec Systems PDM32 - Wiring; Wire Specification

Motec Systems PDM32
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MoTeC Appendices 43
Wiring
Wire Specification
M22759/16
Insulation Material: Tefzel
Conductor: Tin Plated Copper
Voltage Rating: 600 V
Maximum Temperature: 150 °C
Wire
Gauge
(AWG)
Current Rating
at 80 °C ambient
[A]*
Current Rating
at 100 °C ambient
[A]*
Resistance
[ohm/m]
Resistance
[ohm/1000 ft]
24# 4.5 4 0.071 22
22# 6 5 0.045 14
20# 8 6 0.028 8.5
18# 11 9 0.018 5.5
16# 15 12 0.014 4.3
14# 22 18 0.009 2.7
6#
90 75
0.0015 0.44
4#
120 100
0.0009 0.28
2#
150 120
0.0006 0.18
*The current ratings above are an indication only and will not apply in all
circumstances.
The actual maximum current rating is determined by the maximum allowed
temperature for the wire (150 °C).
The temperature of the wire is affected by many factors including the
temperature of adjacent wires, how the wires are bundled and covered, the
ambient temperature and the current.
‡current rating for a single wire in free air
Recommended Wire Gauge Output
24# to 20# 8 Amp outputs
20# to 16# 20 Amp outputs
4# to 2# Battery pos