1. Buttons & Features
Motif Twist Quick Guide
30 Min. Timer
Assembling The Twist Pump
2. Preparing The Twist Pump
1. Wash hands before touching breast pump
components.
2. Snap the membrane into the valve until it
lies completely flat.
3. Place the valve up into the connector and
make sure the seal is tight.
4. Attach the diaphragm on top of the
connector.
5. Connect the diaphragm top by attaching it
to the top of the diaphragm.
6. Insert the tubing connector with the tubing
attached to the diaphragm.
7. Screw the storage container onto the
connector.
8. Insert the tubing connector into the
pumping port on the breast pump.
9. Insert the DC connector on the power
cord into the DC port on the pump,
then insert the USB into the USB socket
adapter and plug it into a power outlet.
10. After pumping, store your breastmilk in the
refrigerator and clean your pump. Make
sure all electric components are dry.
Min. Power
Expression
Mode
Max Power
On/Off
MIN MAX
Massage
Mode
To Next Page
General
