INSTRUCTIONS
7
Brewer Set-Up
1. Remove packaging materials, labels, stickers and plug cover.
2. Wash filter basket and filter basket lid by
hand or on the top rack of the dishwasher.
To detach the filter basket, depress the
button on the inside of the handle and pull
gently. To reattach the filter basket, do not
depress the button in the handle, instead
slide the filter basket back onto the brewer
until you hear a click. Then place the lid on
the filter basket.
3. Wash the carafe and carafe lid by hand or on the top rack of the
dishwasher.
4. Wash the showerhead by hand or on
the top rack of the dishwasher. To attach
the showerhead to the brewer, align the
showerhead over the water tank and press
down until the seal in the water tank secures
the showerhead firmly in place.
5. Wipe the brewer with soft, damp cloth
6. To turn off the audible beep, press and hold the Standard Brew
and Pre-Soak Brew buttons at the same time. Two beeps confirm the
sound is off, one beep indicates the sound is on.
To Next Page
Loading...
