Motion CM-35 - Single Select 15-Channel Remote; 15-Channel Single Select Pairing

1
1
11
11
+
11
14
14.1
14.3
14.2
14.4 14.5
MOTION CM-35 ELECTRONIC CURTAIN MOTOR
MOTION CM-35 ELECTRONIC CURTAIN MOTOR
The remote starts
searching for blinds
(search mode). This
is indicated by the
horizontal bars on the
remote.
To activate Single
select simultaneously
hold the center
button and press the
pair button.
Single select makes it possible to activate program mode on a single blind through a
remote control, without having to physically press the program button on the blind.
To search for
the next blind
press the right
button. Search
mode will be
activated.
To find the
previous blind
press the left
button.
To exit Single
select press
the right
button during
search mode.
The display
shows the
letter O.
Once a blind is found
the channel number
will flash and the
blind starts stepping,
indicating that
program mode has
been activated. The
blind can now be (un)
paired to the remote
and/or programmed.
Single select 15 channel remote
22
CM35AC Curtain motor.indd 22 31-07-2020 13:53