EasyManua.ls Logo

MotionRC OV-10 BRONCO User Manual

MotionRC OV-10 BRONCO
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction Manual
OV-10 BRONCO
95% ALMOST READY TO FLY EP/GP
OPTIONAL ELECTRONIC RETRACTABLE LANDING GEAR (NOT INCLUDED).
INCLUDES OLEO STRUTS.
ALL BALSA - PLY WOOD CONSTRUCTION.
COVERED WITH ORACOVER.
SPECIFICATION:
- Wingspan:1,800 mm (70.87in).
- Length: 1,748mm (68.8 in).
- Weight: 6.8 - 7.1 kg (14.96 - 15.62 lbs).
- Wing area: 57.1dm
2
.
- Wing loading:119.1 g/dm
2
.
- Wing type: Naca Airfoil.
- Servo mount: 33mm x 17mm.
- Gear type: Eltronic retracts, 90 degree.
size: 81 x 44 x 29mm (not included).
Oleo struts (included).
- Spinner: 58mm (2pcs).
Parts Required (not included):
- Radio: 6 channels min,
(Admiral RX1000, 10ch Rx recommended).
- Servo: 45g Standard type (8pc),
(Hitec HS-485HB recommended).
- Engine: 40 - 46 2 stroke (2pcs) for nitro option.
- Motor : 35 - 42 size Brushless Outrunner Electric Motor (2pc),
(4S set-up, Admiral GP5 4220 770kv recommended)
(4S set-up, Tomcat G52 5025 590kv recommended)
.
- Propeller: 12x8 2 blade (2pc).
- ESC: 65 - 85amp Brushless ESC (2pc),
(ZTW Mantis 65 recommended).
- Battery: 4S 4000 - 5000mah 14.8v 40 - 50C Lipo (2pc),
(Admiral 4000mah 4S 40C recommended)
6S 5000-6000mah 22.2v 40-50C Lipo,
(Admiral 5000mah 6S 50C recommended)
- Retracts: XWAVE RM400-90 recommended
Question and Answer IconNeed help?

Do you have a question about the MotionRC OV-10 BRONCO and is the answer not in the manual?

MotionRC OV-10 BRONCO Specifications

General IconGeneral
AileronsYes
ElevatorYes
RudderYes
MaterialEPO Foam
Skill LevelIntermediate
Power SystemBrushless Motor
Servos9g

Summary

Specification

Symbols Used

Parts Listing (Not Included)

Tools & Supplies Needed

Preparations

Exploded View (General)

Installing the Ailerons and Flaps

Installing the Aileron and Flap Servos

Install servos for ailerons and flaps into the wing.

Installing the Control Horns and Linkages

Rudder Installation

Installing Horizontal Stabilizer

Installing the Engine

Installing the Stopper

Installing the Fuel Tank

Installing the Throttle

Installing the Electric Motor (EP Version)

Installing the Wheel Well

Installing Main Gear

Electronic Retract Installation

Installing the Nose Gear

Mounting the Cowl

Installing the Spinner

Plastic Parts for Fuselage

Installing the Receiver and Battery

Installing the Switch

Wing Attachment, Horizontal Stabilizer

Installing Cockpit Fuselage

Balancing

Lateral Balance

Pre-Flight Check

Control Throws

Basic Power System Set-up Guideline

Main Gear Dimensional Detail

Decal Guide

Exploded View (Detailed)

I/C Flying Warnings

I/C Flying Guidelines