Need help?Do you have a question about the MOTO GUZZI 850-T and is the answer not in the manual?
General| Bore x Stroke | 83 mm x 78 mm |
|---|---|
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Rear Suspension | Twin shocks |
| Engine Type | Four-stroke, V-twin |
| Frame | Steel |
| Front Brakes | Dual discs |
| Rear Brakes | Single disc |
| Dry Weight | 220 kg |
| Top Speed | 185 km/h |
Core engine, transmission, and clutch specifications including cylinder disposition, bore, stroke, and gear ratios.
Information on the frame, suspension system, wheel specifications, and tire sizes.
Details on brakes, dimensions, weights, performance data, and fluid capacities.
Operation of throttle, levers, buttons, and switches located on the handlebar.
Operation of footrests and pedals for riding.
Headlight, signals, indicator panel, speedometer, and rev-counter.
Identifying the motorcycle using frame and engine serial numbers.
Guidelines for genuine parts, warranty period, and conditions.
Description of dashboard gauges, warning lights, and indicators.
How to use the ignition key and lock the steering.
Operation of lights, horn, turn signals, starter, throttle, gearshift, and fuel controls.
Essential checks before starting and engine starting procedures.
Guidance on riding, stopping, and parking the motorcycle.
Instructions for the initial break-in period and speed limits.
Procedure for cleaning fuel tank, taps, filters, and lines.
Adjusting clutch lever play and front brake system maintenance.
Adjusting rear brake pedal and suspension settings.
Step-by-step guide to remove and refit the front wheel.
Steps for removing and reinstalling the rear wheel.
Procedures for adjusting spoke tension and wheel balancing.
Overview of maintenance tasks at different mileage intervals.
Procedures for checking and replacing engine oil for optimal performance.
Details on checking and changing gearbox and rear drive box oil.
Guidance on lubricating front fork and suspension components.
Details on carburetor model, types, and standard settings.
Instructions for adjusting carburation and setting idle speed.
Procedures for checking and adjusting tappet clearance and valve timing.
Maintenance and adjustment of contact breaker points and ignition timing.
Specifications for ignition timing and spark plug maintenance.
Instructions for checking and maintaining the 12V battery, including connections.
To Next Page