Need help?Do you have a question about the MOTO GUZZI 850-T3 and is the answer not in the manual?
General| Bore x Stroke | 83 mm x 78 mm |
|---|---|
| Compression Ratio | 9.2:1 |
| Transmission | 5-speed manual |
| Final Drive | Shaft drive |
| Front Suspension | Telescopic fork |
| Rear Brake | Single disc |
| Engine Type | Air-cooled, V-twin |
| Fuel System | Dell'Orto carburetors |
| Rear Suspension | Twin shock absorbers |
| Frame | Steel |
A summary of the key technical specifications and features of the motorcycle.
Comprehensive listing of all handlebar and foot-operated controls and their functions.
Identifies and explains the functions of indicators and gauges on the instrument panel.
Instructions for starting and stopping the engine using the ignition key and start button.
Operation of the clutch, front brake, and throttle control levers on the handlebar.
How to operate the rear brake pedal and gearshift pedal.
Essential checks before starting and procedures for starting the engine.
Procedures for stopping, parking, and breaking in the motorcycle.
Tasks to perform after the first 500 km, including oil change and bolt tightening.
Adjusting the front brake lever and checking brake pad wear.
How to check brake fluid and bleed air from the front braking circuit.
Instructions for bleeding air from the rear and left front braking circuits.
Importance of tyre condition and correct pressure for stability and safety.
How to check and maintain the engine oil level using the dipstick.
Procedure and intervals for changing the engine oil.
Details on the type of carburetors and their standard settings.
Step-by-step guide for adjusting carburetor settings by hand.
How to check and adjust tappet clearance for proper valve operation.
How to maintain and inspect the double contact breaker points.
To Next Page
