Need help?Do you have a question about the MOTO GUZZI GRISO 1100 and is the answer not in the manual?
General| Displacement | 1064 cc |
|---|---|
| Bore x Stroke | 92 mm x 80 mm |
| Compression Ratio | 9.8:1 |
| Fuel System | Electronic fuel injection |
| Ignition | Electronic |
| Transmission | 6-speed |
| Final Drive | Shaft drive |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 180/55 ZR17 |
| Engine Type | Four-stroke, 90° V-twin |
| Cooling System | Air-cooled |
| Max Torque | 72.3 lb-ft (98 Nm) @ 6000 rpm |
| Front Suspension | 43 mm upside-down forks |
| Rear Suspension | Single shock absorber |
| Front Brakes | Dual 320 mm discs |
| Seat Height | 800 mm |
| Fuel Capacity | 17 liters |
| Rear Brakes | Single 282 mm disc, 2-piston caliper |
Indicates potential hazards for injury or damage, and important information.
Advice on reading the manual and understanding basic information for safe riding.
Physical/mental state, effects of substances, observing regulations, adapting to conditions.
Correct riding position, holding handlebars, avoiding obstacles.
Wearing a correct helmet and protective clothing for visibility and safety.
Owner responsibility for accessories; avoid those impairing controls or functions.
Placing luggage near center of gravity, distributed evenly, firmly secured.
Avoid bulky objects, do not cover lights, respect load capacity.
Diagram showing numbered components and their names.
Diagram of handlebar controls and their identification key.
Overview of instrument panel and the meaning of its indicators.
Procedure for warning light check and table of instruments/indicators.
Meaning of diagnosis icon and revolution counter function.
Indicates low oil pressure or detected ECU failure.
Low fuel warning light and neutral indicator.
Initial display sequence, zones, and data parameter selection.
Display and control of Trip 1 and Trip 2 data.
Accessing menu configuration and available options.
Setting time, gear shift indicator, and backlighting levels.
Icon displayed when service intervals are reached.
Display shows icons indicating failure cause based on priority.
Operation of turn indicators, horn, dimmer, display selector, flasher, SET button.
Operation of engine stop and starter buttons; relevant warnings.
Key operation, spare key, and storage.
Procedure for locking steering and associated warnings.
Procedure to turn on lights and caution about battery drain.
Seat lock procedure and access to tool kit compartment.
List of tools included and their general usage.
Location of anchor points, weight limit, and security warning.
List of optional accessories available for the vehicle.
Safety warnings for fuel handling and step-by-step refueling.
Tank capacity specification and warnings about filling.
System circuits, lever play, hose condition warnings.
Preventing contamination, using gloves, skin/eye contact precautions.
Brake safety, disc/pad cleaning, fluid change, wear checks.
Front/rear reservoir locations and warning about system leaks.
Procedure for checking and topping up front brake fluid level.
Cautions on lever operation, air exposure, max level, and pad wear.
Procedure for checking and topping up rear brake fluid level.
Cautions on topping up, air exposure, max level, and pad wear.
System description and warning signs for lever play/hardness.
Preventing contamination, skin/eye contact, plastic damage, disposal.
Procedure for checking and topping up clutch fluid level.
Cautions on leak danger, air exposure, and topping up.
Cautions on rocking, additives, max level, and operation check.
Checking tyre pressure and the importance of correct inflation.
When to change tyre, repair punctures, and balance wheels.
Using recommended tyres, checking wear indicators, tread depth.
Skin contact, disposal, ventilation, low oil pressure warnings.
Procedure for checking and topping up engine oil level.
Procedure for adjusting lever grab distance.
Converter heat warning and correct fuel type.
Checking silencer and prohibition of tampering with noise control.
Procedures to avoid injury, side stand use and load warnings.
Detailed steps for rider and passenger mounting and dismounting.
Importance of checks, ECU capabilities, alarm LED function.
Meaning of failure icons and service interval indicator.
Checks for brakes, throttle, oil, wheels, tires, clutch, steering, side stand.
Procedures, exhaust emissions, ventilation, and low fuel warnings.
Side stand neutral start and ignition switch operations.
Automatic cold start function and low oil pressure warnings.
Cautions for cold engines and failure detection indicators.
Familiarization, handlebar obstruction, riding position, passenger instructions.
Low fuel warning, engaging first gear.
Clutch release, acceleration, engine warm-up, RPM limits.
Gear shifting, low RPM caution, downshifting procedures.
Downshifting steps, braking procedures, clutch usage.
Cornering approach, downhill braking, slippery road advice.
Running-in importance, RPM limits, post-checks, ground conditions.
Direction indicators, overtaking, rainy conditions advice.
Abrupt stopping, deceleration, braking procedures and warnings.
Parking surface, vehicle placement, hot parts, unattended vehicle warnings.
Side stand operation, stability warnings, parking area selection.
Disc lock usage, ignition/steering lock, parking location, documents.
Fire risk, preparation, ventilation, hot parts, component handling.
Dealer service recommendation, road test, post-maintenance checks.
List of tasks for running-in, 10000 km, 20000 km intervals.
Gearbox fluid, steering, wheels, brakes, air filter, pads, valves.
Transmission fluid, fuel pipes, brake lines, clutch wear, spark plugs, belts.
Frame/engine numbers, alteration warnings, and locations.
Clamp removal caution, condition check, and fastening.
Procedure for checking and topping up engine oil level.
Difficulty of operation, hot oil warning, oil disposal.
Steps for draining oil and changing the oil filter.
Disassembly cautions, rim checks, dealer assistance.
Procedure for removing and installing the oil filter.
Disc/pad cleaning, lever operation cautions, caliper removal.
Reassembly precautions, caliper screw replacement and tightening.
Procedure for checking and topping up cardan shaft oil.
Contact dealer for gearbox fluid check, top up, and change.
Mirror setting warnings, adjustment, and cleaning advice.
Procedure for removing and setting rear-view mirrors.
Inspection of suspensions, fork oil change service.
Fork checks, oil seals replacement, dealer assistance.
Procedure for adjusting rear shock absorber, cooling warning.
Procedure for adjusting spring preload and damping.
Warning on using racing settings only for competitions.
Procedure, check frequency, metal substrate contact warning.
When to replace pads, dealer contact for replacement.
Procedure for adjusting throttle control, idle stroke check.
Outer spark plug checks, cleaning, replacement intervals.
Removal procedure, cleaning cautions, simultaneous replacement.
Inspection, cleaning, and criteria for replacing spark plugs.
Procedure for installing spark plugs, tightening torque, warnings.
Stand operation, smoothness check, spring function.
Side stand checks, safety switch function and operation.
Fire risk, cable polarity, connection order, ignition switch position.
Fuse disconnection, battery charging, removal for storage.
Checking and cleaning battery terminals.
Steps for removing battery, reset cautions, storage warnings.
Charger requirements, ventilation, charging gases warnings.
Positioning, insertion, cable connection order warnings.
Connecting terminals, protection, retainer tightening.
Checking switches for dirt, free movement, and cable connections.
Warnings on faulty fuses, specifications, damage risk; fuse check procedure.
Trouble identification, replacement, spare fuse usage, function reset.
Arrangement of auxiliary and main fuses.
Note on varying beam inspection procedures by country.
Horizontal and vertical adjustment procedures, cautions.
Bulb handling, fire risk, and electrical component precautions.
Cautions on bulb cooling, handling, fingerprints, cable force.
Procedure for removing and installing bulbs.
Procedure for replacing parking light and turn indicator bulbs.
Note on LED tail light and complex number plate bulb replacement.
Fuel tank draining, fire risk, ventilation, disposal warnings.
Securing vehicle for transport and towing warnings.
Cleaning frequency, specific areas/conditions, bodywork contamination.
Washing procedures, braking impairment, post-wash checks.
Cautions on compartments, washing, plastic parts, high pressure jets.
Fuse disconnection, inactivity precautions, necessary repairs.
Battery removal, washing, waxing, tyre inflation, storage location.
Exhaust bags removal, cleaning, battery check, fuel filling, pre-ride checks, test ride.
Length, width, height, wheelbase, ground clearance, weight.
Engine model, type, displacement, capacities, fluids.
Gear ratios, frame type, steering angle, suspension specifications.
Brake type, rim type and size.
Tyre sizes/pressures, spark plug types/gap, electrical system.
Bulb ratings and types of warning lights.
Engine oil, transmission oil, fork oil, grease, protectant.
Warning on brake fluid use and recommended type.
Importance of dealer service, finding nearest dealer via website.
Benefits of using Moto Guzzi Genuine Parts for reliability.
Recommendations on not releasing pollutants and reducing noise.
To Next Page