MOTO GUZZI GRISO 1100 User Manual

use and maintenance Griso
22
CONTROLS ON RIGHT HANDLEBAR
NOTE The electric components only operate when the ignition
switch is in the “ ” position.
7) ENGINE STOP SWITCH (-)
8) STARTER BUTTON ()
When the starter button " " is pressed, the starter motor will
crank the engine. See page 43 (STARTING) for the starting
procedure.
WARNING
Do not operate the engine stop switch " - " while riding.
This switch serves as a safety or emergency switch. With the
switch pressed in position “ ”, it is possible to start the
engine; the engine can be stopped by pressing the switch to
position “ ”.
CAUTION
With the engine stopped and the ignition switch in position
" ", the battery may wear down.
When the vehicle has come to a standstill and you have
stopped the engine, set the ignition switch to position " ".
7
8
GUZum_griso#06_##uk.book Page 22 Friday, March 10, 2006 5:19 PM

MOTO GUZZI GRISO 1100 Specifications

General

Displacement	1064 cc
Bore x Stroke	92 mm x 80 mm
Compression Ratio	9.8:1
Fuel System	Electronic fuel injection
Ignition	Electronic
Transmission	6-speed
Final Drive	Shaft drive
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Engine Type	Four-stroke, 90° V-twin
Cooling System	Air-cooled
Max Torque	72.3 lb-ft (98 Nm) @ 6000 rpm
Front Suspension	43 mm upside-down forks
Rear Suspension	Single shock absorber
Front Brakes	Dual 320 mm discs
Seat Height	800 mm
Fuel Capacity	17 liters
Rear Brakes	Single 282 mm disc, 2-piston caliper