Need help?Do you have a question about the MOTO GUZZI Nevada Classic 750 ie 2004 and is the answer not in the manual?
General| Year | 2004 |
|---|---|
| Manufacturer | MOTO GUZZI |
| Model | Nevada Classic 750 ie |
| Category | Motorcycle |
| Displacement | 744 cc |
| Bore x Stroke | 80 x 74 mm |
| Fuel System | Electronic Fuel Injection |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Tire | 100/90-19 |
| Rear Tire | 130/80-17 |
| Engine Type | V-twin |
| Power | 50 hp |
| Front Suspension | Telescopic fork |
| Rear Suspension | Twin shock |
| Front Brake | Single 320 mm disc, 4-piston caliper |
| Rear Brake | Single 260 mm disc, 2-piston caliper |
| Fuel Capacity | 16 liters |
| Seat Height | 770 mm |
| Wheelbase | 1, 470 mm |
Purpose, audience, reference manuals, and abbreviations for the workshop manual.
Outlines manual structure, conventions, and safety warnings for user guidance.
Covers general rules, dangerous elements (fuel, fluids), and running-in recommendations.
Explains frame and engine serial number locations for vehicle registration and identification.
Provides technical data, maintenance charts, lubricants, torque specs, and special tools.
Identifies main parts, controls, and instruments on the motorcycle.
Details procedures for engine oil/filter change and air filter cleaning.
Illustrates the layout of various systems like brakes, exhaust, and crankcase recovery.
Details the fuel system layout, including the tank, throttle body, and pump assembly.
Covers injection system layout, cylinder synchronization, and CO rate setting.
Explains the Axone 5.0.0 tool and intake manifold fitting procedures.
Procedures for removing the engine from the frame, refitting it, and related tightening torques.
Details component identification, checks, and ECU connection pinouts.
Presents the complete wiring diagram of the motorcycle's electrical system.
Procedures for removal, inspection, and reassembly of the swing arm and transmission.
Details removal, inspection, reassembly, and tightening torques for the transmission case.
Step-by-step instructions for disassembling the transmission case and related parts.
Focuses on inspection and tightening torques for rear swing arm components.
Covers front fork diagram, removal, overhaul, troubleshooting, oil change, and disassembly.
Instructions for adjusting play in steering bearings and related tightening torques.
Details removal, inspection, refitting, and tightening torques for rear suspensions.
To Next Page