Need help?Do you have a question about the Motomaster 009-1518-6 and is the answer not in the manual?
General| Brand | Motomaster |
|---|---|
| Model | 009-1518-6 |
| Material | Steel |
| Color | Black |
| Mounting Location | Hitch |
Do not modify, respect load limits, avoid dynamic loading, keep clear of children.
Mount on studs, away from flammables, seek assembly help if needed.
Read and follow all warnings and operating instructions before use.
Lists necessary tools for assembly: drill, wrench, stud finder, level, pencil, goggles, tape measure, ladder.
Plan location, find studs, mark and pre-drill mounting holes.
Attach support assemblies to the wall with lag screws, but do not fully tighten.
Ensure supports are level, drill remaining holes, and secure.
Insert remaining lag screws into supports and fully tighten all fasteners.
Expand supports, insert pin assembly, and secure horizontal supports with R-Pin.
Connect tube sets to horizontal supports using bolts and spring washers.
Check and adjust hardware tightness for easy folding and storage.
Regularly inspect for damage, keep clean, and replace if damaged.
To Next Page
