EasyManua.ls Logo

Motomaster ELIMINATOR 011-2047-2 User Manual

Motomaster ELIMINATOR 011-2047-2
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION
MANUAL
400 W POWER INVERTER
PURE SINE WAVE
GF
2.1A
SAVE THESE INSTRUCTIONS!
This manual contains important safety and operating instructions.
Read all instructions and follow them with use of this product.
Questions? Call Customer Service Hotline: 1-877-466-8191
model no. 011-2047-2

Questions and Answers:

Motomaster ELIMINATOR 011-2047-2 Specifications

General IconGeneral
Input Voltage12V DC
Output Voltage120V AC
Frequency60Hz
Efficiency85%
WaveformModified Sine Wave
USB Ports1
USB Output5V DC, 2.1A
CoolingFan
ProtectionOverload, Short Circuit, Over Temperature
Power Output400W

Summary

Introduction

Specifications

Warnings

General Safety Warnings

Highlights hazards such as lethal output, heat generation, need for dry environment, overload limits, polarity, and unit opening.

Key Parts Diagram

Front Panel Components

Details LEDs, AC outlets, USB port, and ON/OFF switch located on the front of the inverter.

Rear Panel Components

Identifies DC input terminals, ground terminal, and cooling fan on the rear of the inverter.

Operation

Load Considerations

Explains the impact of appliance startup load and automatic overload shutdown features.

Battery Setup and Connection

Covers recommended battery types, mounting, and the procedure for connecting the inverter.

Operating Procedure

Provides a step-by-step guide for connecting the inverter, powering it on, and running appliances.

Safety Precautions During Operation

Includes cautions regarding sparks during connection and handling batteries safely.

Troubleshooting Operating Issues

Offers tips for improving TV/audio reception and mitigating electrical noise.

Troubleshooting

Low or No Output Voltage Issues

Addresses problems related to poor battery contact and terminal connections.

Inverter Auto Shut Down Issues

Covers reasons for inverter shutdown, including low battery voltage and overheating.

Inverter Shut Down due to Overload

Explains issues when equipment draws excessive power, leading to shutdown.

No AC Output - Ground Fault Issues

Addresses problems with unintended AC current flowing to ground, possibly due to faulty wiring.

Warranty and Disposal

Product Warranty Information

Details the one-year limited warranty against defects in workmanship and materials.

Disposal and Recycling Instructions

Advises contacting local authorities for information on proper disposal of electronic products.

Related product manuals