Motorline professional MC50SE

Questions and Answers

B
Bobby ThomasAug 3, 2025
How to troubleshoot a Motorline professional MC50SE when the motor doesn't work?
- D
  debra96Aug 4, 2025
  If the Motorline professional Controller's motor isn't working, first ensure a 230V power supply is properly connected to the control board. Next, check the input fuses, connecting directly to the power supply to identify any issues. If problems persist, open the control box, remove the control board, and send it to Motorline technical services for diagnosis. If these steps do not resolve the issue, consult a qualified Motorline technician.
V
Vincent JohnsonAug 11, 2025
What to do if the Motorline professional MC50SE Controller's gate doesn’t make a complete route?
- E
  eramirezAug 11, 2025
  If the Motorline professional Controller's gate doesn’t complete its route, begin by unlocking the motor and manually moving the gate to the closed position. Lock the motor again, turn off the power supply for 5 seconds, and then reconnect it, sending an open command via the transmitter. Also, check for any obstructions in front of the photocells and ensure that no control devices are jammed, sending a continuous signal to the control unit. If problems persist, close all safety systems with a shunt, disconnect all wires from LS and LO, and check each device one at a time to find the defective device. If issues remain, remove the control board and send it to Motorline technical services for diagnosis. If all else fails, consult a qualified Motorline technician.
A
Allen FloresAug 19, 2025
Why Motorline professional MC50SE Controller’s motor doesn’t move but makes noise?
- P
  pcooperSep 12, 2025
  If the Motorline professional Controller's motor makes noise but doesn’t move, unlock the motor and manually move the gate to check for mechanical issues. Inspect the motion axis and related systems connected to the motor and gate. Check the capacitors, testing the operator with a new capacitor. If the motor now works, the control board is likely the issue. If the motor still doesn’t work, remove it and send it to Motorline technical services for diagnosis. If these steps do not resolve the issue, consult a qualified Motorline technician.
J
johnsongabrielAug 27, 2025
How to fix a Motorline professional Controller when the gate moves easily but doesn’t work properly?
- K
  Kevin SandersAug 27, 2025
  If the Motorline professional Controller's gate moves easily but doesn’t work properly, check the capacitors, testing with new capacitors. Ensure the controller's force setting is sufficient for the gate to open and close without stopping, but also allows it to stop and reverse with slight manual effort. In case of safety system failure, remove the control unit and send it to Motorline technical services for diagnosis.