APX 8000XE M2 AND M3
122
NEXT > < PREV CONTENTS
Model 3
Call Alert Paging
Sending a Call Alert Page
ADVANCED FEATURES
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle and the
timer expires.
You will hear the menu inactive exit tone upon feature exit.
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed Quick Access (One-Touch)
Call Alert Paging button to send a page to the
preprogrammed ID.
The display shows Paging... <Number>.
If the call alert page is sent successfully, you hear a tone
and the display shows Ack received.
OR
If the call alert page is not acknowledged, you hear a low
tone and the display shows No acknowledge.
The radio returns to the home screen.
OR
Press the Menu Select button directly below Ok to return
to the main screen for Contacts.
OR
[Menu (Page)]
1. or to Page.
2. Press the Menu Select button directly below Page.
3. Press Cnts to scroll through and select the required ID.
OR
or to the required ID.
OR
Use the keypad to enter the required ID.
4. Press the PTT button to send the page.
The display shows Paging... <Number>.
If the call alert page is sent successfully, you hear a tone
and the display shows Ack received.
OR
If the call alert page is not acknowledged, you hear a low
tone and the display shows No acknowledge.
To Next Page
Loading...
