APX 8000XE M2 AND M3
16
NEXT > < PREV CONTENTS
RF ENERGY EXPOSURE TRAINING AND PRODUCT SAFETY INFORMATION
RF Exposure Compliance and Control Guidelines
To control your exposure, and ensure compliance with the relevant RF exposure limits, always adhere to the following
guidelines:
• Do not remove any of the RF Exposure Labels if present from this device or its related accessories.
• Attach these instructions to the device when you transfer it to other users.
• Do not use this device if the operational requirements described herein are not met.
Operating Instructions
• Transmit no more than 50% of the time. To transmit (talk), press the Push-To-Talk (PTT) button. To receive calls, release the
PTT button. Transmitting more than 50% of the time may cause RF exposure compliance requirements to be exceeded.
• Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the
antenna) at least 1 in. (2.5 cm) away from the nose or lips. Antenna should be kept away from the eye.
• When worn on the body, always place the radio in a Motorola Solutions approved clip, holder, holster, case, or body harness
for this product.
• DO NOT hold the antenna when the radio is transmitting.
• DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a
minor burn can result.
• To ensure continued compliance with applicable RF exposure limits, use only Motorola Solutions approved, supplied or
replacement antennas, batteries, and accessories.
• For a list of Motorola Solutions approved accessories please refer to your user manual or visit www.motorolasolutions.com.
To Next Page
Loading...
Need help?
General
