APX 8000XE M2 AND M3
19
NEXT > < PREV CONTENTS
RF ENERGY EXPOSURE TRAINING AND PRODUCT SAFETY INFORMATION
Batteries
• Charge your battery using the approved Motorola Solutions charger.
• Use the battery in accordance with its water and/or dust Ingress Protection (IP) rating.
• Do not discard your battery into a fire.
• Do not replace the battery in any area labeled "Hazardous Atmosphere".
• Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.
• Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.
• Do not allow conductive material such as jewelry, keys, or beaded chains to touch exposed battery terminals.
Repair
Repairs to a Motorola Solutions intrinsically safe radio product certified by, for example, FM, UL, CSA,
CENELEC, should only be done at a location that has been audited under the certifying body's repair and
service standard.
Contact Motorola Solutions for assistance regarding repairs and service of Motorola Solutions intrinsically safe
equipment.
A repair constitutes something done internally to the unit that would bring it back to its original condition.
Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of
the unit to be opened in a manner that exposes the internal electrical circuits of the unit.
To Next Page
Loading...
Need help?
General
