Motorola solutions APX 8000XE - Pairing Authentication PIN by Manually Keying Same PIN

APX 8000XE M2 AND M3
227
NEXT > < PREV CONTENTS
ADVANCED FEATURES
Pairing the Authentication PIN by Manually Keying in the
Same PIN
Note: If the device or profile does not support this feature, the
radio prompts BT profiles not supported as your radio only
supports HSP, DUN, PAN and SPP.
Procedure:
Follow procedure Searching and Pairing the Bluetooth Device
to search for Bluetooth devices available, then start pairing
with Authentication PIN with the following.
1. or to the required device.
2. Press the Menu Select button below Sel to initiate
pairing.
The display shows Pairing in progress... followed by
requesting user to enter PIN number.
3. A blinking cursor appears below the Enter PIN:.
Use the keypad to enter the PIN.
Press to move one space to the left.
Press to move one space to the right.
Press the Menu Select button directly below Del to
delete.
4. Press Ok to proceed.
OR
Press the Menu Select button below Cncl to reject.
The display shows Cancel pairing in progress...
followed by <Device Friendly Name> pair canceled and
return to home screen.
OR
The display shows BT profiles not supported.
The display returns to Available Dev screen.
The radio and device continue pairing.
The display shows Pairing in progress.
OR
The display shows <Device Friendly Name> pair failed.
Repeat step 3.
If the PIN number is authentic, the display shows <Device
Friendly Name> paired.
OR
If the PIN number is different, the display shows <Device
Friendly Name> pair failed.
The display returns to Available Dev screen.
Repeat step 3.
The display shows Connecting in progress... followed
by <Device Friendly Name> connected.
The display returns to Bluetooth feature screen.
OR
The display shows <Device Friendly Name> connect
failed.
The display returns to Available Dev screen.