APX 8000XE M2 AND M3
237
NEXT > < PREV CONTENTS
Site Selectable Alerts (ASTRO 25)
Sending SSA Notification to Single Site Via Manual Entry
ADVANCED FEATURES
Procedure:
1. or to SSA.
2. Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3. or to Start Alert.
4. Press the Menu Select button directly below Sel.
The display shows the Select Site screen.
5. or to [SiteID Entry].
6. Press the Menu Select button directly below Edit.
The display shows the Enter SiteID screen.
7. Key in the desired Site ID, then press the Menu Select
button directly below Ok.
If a correct Site ID is entered, the display shows the
Select Alert screen.
OR
If a wrong Site ID is entered, the display shows Invalid ID
and prompts to enter the Site ID again.
8. or to the desired Alert Alias.
9. Press the Menu Select button directly below Send.
The display shows Sending req.
OR
If radio is out of range, roaming to a foreign system or in a
failsoft situation, the display shows Req failed.
If the request is successful, the display shows Req
successful.
OR
If the single site is not available, the display shows <Site
ID> not available.
OR
If the single site does not exist, the display shows <Site
ID> does not exist.
10.Press the Menu Select button directly below Exit to
return to the home screen.
If you are at the site designated to receive this alert, you
can hear an alert tone repeated periodically.
The display shows the <Alert Alias> with the intelligent
lighting at home screen.
Model 3
To Next Page
Loading...
Need help?
General
