APX 8000XE M2 AND M3
255
NEXT > < PREV CONTENTS
Selecting the Audio Speaker
UTILITIES
This feature allows you to select the speaker route for the
radio's audio from either the main or the secondary speaker
using the radio profile settings.
While both speakers function together with the secondary
speaker enhancing intelligibility of the received audio during
typical radio operation, each speaker has an independently-
tuned frequency response and volume level operation.
The secondary speaker also has a "whisper" mode with a
modified volume taper for quieter modes of operation.
Note: If an external speaker or microphone accessory is
attached to the radio, neither internal speaker is operational
as audio is routed to the accessory.
Procedure:
[Preprogrammed Button]
1. Use the preprogrammed Profile button.
2. or to scroll through the menu selections.
3. Press the Menu Select button directly below Sel to select
the radio profile with the required speaker routing.
OR
Press the Menu Select button directly below Exit to exit
the screen without making any changes.
The radio returns to the home screen.
The profile name on the home screen indicates the
current selected radio profile.
OR
[Menu]
1. or to Prfl.
2. Press the Menu Select button directly below Prfl to
access the Profiles feature screen.
3. or to scroll through the menu selections.
To Next Page
Loading...
Need help?
General
