To Next PageTo Next Page
Need help?Do you have a question about the Motorola solutions EVX-261 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| IP Rating | IP54 |
| Operating Temperature | -30°C to +60°C |
| Battery Type | Li-Ion |
| Programmable Buttons | 2 |
| Operating Voltage | 7.4 V |
| Audio Output | 500 mW |
| Frequency Range | 403-470 MHz |
Device complies with FCC and Industry Canada rules; user must not cause interference or modify.
Instructions for attaching and detaching the battery pack to the radio.
Steps for charging the battery pack using the desktop charger.
How the radio indicates a low battery status via LED.
Guide to installing and removing the belt clip accessory.
Instructions for installing the microphone/speaker cap for water resistance.
Initial steps required before operating the radio, including battery and antenna setup.
Basic steps to turn on, select a channel, and adjust volume for radio operation.
Features specific to digital mode operation, including Radio Check, Interrupt, Stun, and Revive.
Allows a priority radio to force another radio to open transmission for monitoring.
Limits transmission time and provides warnings before deactivation.
Details on assigning functions to the two programmable keys (SIDE-1, SIDE-2).
Explanation of various functions that can be assigned to programmable keys (e.g., Monitor, Low Power, VOX).
Prevents VOX transmission activation from radio alert tones.
How to activate emergency functions and request assistance.
Feature designed to emit an alarm and switch to emergency mode if timer expires.
Sets the current channel as the priority channel for Dual Watch.
Disables the priority channel, affecting Dual Watch functionality.
Monitors multiple channels and stops on a channel with a signal.
Monitors two channels (current and priority) and pauses on transmission.
Scans a user-assigned priority channel along with programmed scan list channels.
Bypasses repeater to talk directly to nearby stations on duplex systems.
Allows adding or deleting channels from the scan list.
Bypasses repeater to talk directly to nearby stations on duplex systems.
Resets communication in the selective call feature.
Sends a pre-programmed 2 Tone/5 Tone call signal.
Recalls pre-programmed stations with a single key press.
Dials pre-programmed Auto-Dial telephone numbers using DTMF tones.
Paging operation feature that controls audio reception on the paging channel.
Extends battery life by reducing transmit power when a strong signal is received.
Activates/deactivates locking of controls like the CH Selector, Programmable keys, and PTT.
Informs operator about communication range with other ARTS™-equipped devices.
