APX 8000XE M2 AND M3
73
NEXT > < PREV CONTENTS
Receiving and Responding to a Radio Call
Receiving and Responding to a Private Call (Trunking Only)
GENERAL RADIO OPERATION
A Private Call is a call from an individual radio to another
individual radio.
These one-to-one calls between two radios are not heard by
others in the current talkgroup. The calling radio automatically
verifies that the receiving radio is active on the system and
can display the caller ID.
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left idle long
enough for the time to expire. You will hear the menu inactive
exit tone upon feature exit.
Procedure:
When you receive a Private Call:
1. You hear two alert tones and the LED blinks green.
The display shows Call received and the caller alias or
ID.
Press the Menu Select button directly below Resp within
20 seconds after the call indicators begin.
OR
Press the Call Response button within 20 seconds after
the call indicators begin.
During the call, the display shows the caller alias (name),
if it is in the call list.
OR
During the call, the display shows the caller ID (number),
if the caller’s name is not in the call list.
2. Press and hold the PTT button to talk.
Release the PTT button to listen.
3. Press or the Call Response button to hang up and
return to the home screen.
To Next Page
Loading...
Need help?
General
