APX 8000XE M2 AND M3
78
NEXT > < PREV CONTENTS
Making a Radio Call
Making an Enhanced Private Call (Trunking Only)
GENERAL RADIO OPERATION
This feature allows you to send an individual Call Alert Page if
there is no answer from the target radio.
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed Quick Access (One-Touch)
Enhanced Private Call button to dial the preprogrammed
ID.
The display shows Calling... <Number>.
2. When you are connected, the display shows the ID of the
target radio.
Press and hold the PTT button to talk.
Release the PTT button to listen.
OR
If no acknowledgement is received, the display shows No
acknowledge.
OR
If the target radio does not respond before the time out,
the display shows No answer.
3. Press to return to the home screen.
OR
[Menu]
1. or to Call.
2. Press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
3. Press the Menu Select button directly below Cnts.
Scroll through and select the required ID.
OR
Press the Menu Select button directly below LNum to go
to last number dialed.
OR
or to the required ID.
OR
Use the keypad to enter the required ID.
4. Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
5. When you are connected, the display shows the ID of the
target radio.
Press and hold the PTT button to talk.
Release the PTT button to listen.
To Next Page
Loading...
