APX 8000XE M2 AND M3
88
NEXT > < PREV CONTENTS
Advanced Call Features
Selective Call (ASTRO Conventional Only)
ADVANCED FEATURES
This feature allows you to receive a call from or to call a
specific individual. It is intended to provide privacy and to
eliminate the annoyance of having to listen to conversations
that are of no interest to you.
Receiving a Selective Call
Procedure:
When you receive a Selective Call:
1. You hear two alert tones and the LED lights up solid
yellow.
The call received icons blinks and the display shows Call
received.
You hear two alert tones, the LED lights up solid yellow to
indicate the transmitting radio is still sending signal.
OR
The LED blinks solid green once to indicate the
transmitting radio is pending to receive signal.
The speaker unmutes.
Press and hold the PTT button to talk.
Release the PTT button to listen.
Making a Selective Call
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed Quick Access (One-Touch)
Selective Call button to dial the preprogrammed ID.
2. Press and hold the PTT button to initiate the Selective
Call.
The display shows the ID of the target radio.
OR
[Menu]
1. or to Call.
2. Press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
3. Press the Menu Select button directly below Cnts to
scroll through and select the required ID.
OR
Press the Menu Select button directly below LNum to go
to the last number dialed.
To Next Page
Loading...
Need help?
General
