APX 8000XE M2 AND M3
91
NEXT > < PREV CONTENTS
Model 3
Advanced Call Features
Sending a Status Call
ADVANCED FEATURES
This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name.
A maximum of eight status conditions is possible.
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle and the
timer expires. You will hear the menu inactive exit tone upon
feature exit.
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed Status button.
The display shows the last acknowledged status call, or
the first status in the list.
2. or to the required status.
OR
Use the keypad to enter a number corresponding to the
location in the status list.
3. Press the PTT button to send the status.
When the dispatcher acknowledges, you hear four tones
and the display shows Ack received.
The radio returns to normal dispatch operation.
OR
If no acknowledgement is received, you hear a low-
pitched tone and the display shows No acknowledge.
4. Press to return to the home screen.
OR
[Menu]
1. or to Sts.
2. Press the Menu Select button directly below Sts.
The display shows the last acknowledged status call, or
the first status in the list.
3. Press the PTT button to send the status.
When the dispatcher acknowledges, you hear four tones
and the display shows Ack received.
The radio returns to normal dispatch operation.
OR
If no acknowledgement is received, you hear a low-
pitched tone and the display shows No acknowledge.
To Next Page
Loading...
Need help?
General
