APX 8000XE M2 AND M3
94
NEXT > < PREV CONTENTS
Advanced Call Features
Requesting a Reprogram (Trunking Only)
ADVANCED FEATURES
This feature allows you to notify the dispatcher when you
want a new dynamic regrouping assignment.
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed Reprogram Request button to
send reprogram request to the dispatcher.
The display shows Reprgrm rqst and Please wait.
If you hear five beeps, the dispatcher has acknowledged
the reprogram request.
The display shows Ack received and the radio returns to
the home screen.
OR
If the dispatcher does not acknowledge the reprogram
request within six seconds, you hear a low-pitched alert
tone and the display shows No acknowledge.
Try again or press to cancel and return to the home
screen.
OR
[Menu]
1. or to Rpgm.
2. Press the Menu Select button directly below Rpgm to
send reprogram request to the dispatcher.
The display shows the last acknowledged status call, or
the first status in the list.
The display shows Reprgrm rqst and Please wait.
If you hear five beeps, the dispatcher has acknowledged
the reprogram request.
The display shows Ack received and the radio returns to
the home screen.
OR
If the dispatcher does not acknowledge the reprogram
request within six seconds, you hear a low-pitched alert
tone and the display shows No acknowledge.
Try again or press to cancel and return to the home
screen.
To Next Page
Loading...
