When and where to use: Your radio may be preprogrammed to receive Private-Line
®
(PL) calls.
Procedure:
1 Momentarily press the Monitor button to listen for activity.
The Carrier Squelch indicator appears on the display.
2 Press and hold the Monitor button to set continuous monitor operation.
The duration of the button press is programmable.
3 Press the Monitor button again, or the PTT button, to return to the original squelch setting.
If you try to transmit on a receive-only channel, you hear an invalid tone until you release the
PTT button.
68012003047-HW
Chapter 5 : General Radio Operation
37
To Next Page
Loading...
