MOTOROLA
AID 5358
07
Line 1 = ZONE / MODE INFORMATION
Line 2 = CHANNEL INFORMATION
SOFT KEY INFORMATION
ZnDn ZnUp Scan Dir
H
,.?
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
*
0
#
123
654
789
Power
On - Off
Multi Function Knob
“MFK”- Volume “Default” / Channel
(Push & Release to change Channels, MFK display symbol will flash green,
knob reverts to Volume after 5 seconds if not used)
Not Used
Home SCC (Long press) /
Exit or Back (Short press)
4 Way Navigation Keys
(Use Left / Right to change menus
Slect “Chan” use up/down to change channels)
Soft Keys
Status LED’s
LASD Motorola APX 7500 - 07 Control Head
Transmit
Receive
Not used
Display
Dimmer
Accessory
Port
This Radio normally has LASD UHF channels and may or may not be configured with a
second radio frequency band in VHF or 800/700 MHz
See page 2 for keypad presets
Changes Zones up or down ( 1 through 50+ Zones )
Channels in the current Zone and can be selected via the keypad or 4 way Nav
Keys (Press Chan enter 1 to 16 or on some zones up to 112 & press slect)
Changes from repeat to direct, this will not be show if the channel is direct only
Shows Zones and you can select the Zone number via the numeric keypad
Turns the Scan on or off
Used to edit and/or read the Scan list
Press to skip scanned channel due to noise, ( turn radio off and on to reset )
Bypasses the Squelch control to hear a distant unit, push and release to reset
Adjusts the Squelch control when in a high static noise area ( adjust settings 1 to 15 )
Available only in command vehicles, High/Low power selection, for use with ACU’s
and other specialized equipment
Available only on MEDCOR 9 (Z-45), Press and release the Phon button, use the 4 way
Nav key or the key pad to select the phone number, press and release the PTT to dial
ZnUpZnDn
Chan
Dir
Zone
Scan
ScnL
Nuis
Mon
Sql
Pwr
Phon
ZnDn ZnUp Scan Dir
Main Menu
Nuis ScnL Mon Chan
Menu 2
Zone Sql Pwr Phon
Menu 3
Soft / 4 way nav key menu information: Display Symbols:
13 Sep 2016
Communications Solutions 323-881-8033
Note: This information may change with out notice. JRH
H
Scanning is on
Radio is in direct
Radio is on High Power
Tone Indicator
Multi Function Key “MFK”
is active to change the
Channel
Warning: Scanning can distract the user from their
home frequency traffic.
You can not talk on a scanned channel unless you
place the radio on the correct mode and channel.
Page 1 of 2
To Next Page
Need help?
General
