APX - FPP SUPPLEMENT 3
Programming Feature Operation
The radio can be programmed in three
ways:
• Front Panel Programming (FPP)
using the front panel controls of the
radio.
• Cloning the radio zone and channel
information for one or more zones;
that is, copying zone and channel
information from one radio to
another radio.
• Customer Programming Software
(CPS), with the radio connected to a
PC computer.
This supplement describes the Front
Panel Programming (FPP) .
Note: The FPP features are not
available when the radio is
mounted in a Vehicular Adaptor.
To Next Page
Loading...
