basics
Press
#
in any text entry screen to select one of the
following entry methods:
Alternatively, you can select a text entry method in any text
entry screen by pressing
M
>
Entry Mode
.
iTAP™ mode
Press
#
in a text entry screen to switch to iTAP mode. If
you don't see
j
or
p
, press
M
>
Entry Setup
to set iTAP mode
as your primary or secondary text entry mode.
iTAP mode lets you enter words using one keypress per
letter. The iTAP software combines your keypresses into
common words and predicts each word as you enter it.
Primary
The primary text entry method (see
below to set).
Symbol
Secondary
The secondary text entry method (see
below to set).
Num er
b
38
Enter numbers only (see page 54).
Enter symbols only (see page 54).
To Next Page
Loading...
