Motorola CLP series Quick Reference Guide

PAIRING YOUR MOTOROLA CLP BLUETOOTH TWO-WAY RADIO WITH
BLUETOOTH HEADSET
Add Bluetooth Headset (Initial Pairing)
1. Turn the radio OFF.
2. Put Bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet.
3. Press and hold the PTT button and power button simultaneously until radio shows the blue LED.
Reconnect to last connected Bluetooth Headset
1. Turn the radio OFF.
2. Press the power button to turn the radio ON. (Make sure the Bluetooth headset is turned ON).
Erase Bluetooth Headset history and add Bluetooth Headset
1. Turn the radio OFF.
2. Put the Bluetooth headset in pairing mode. Refer to your Bluetooth headset Instructions leaflet.
3. Press and hold the MENU button and power button simultaneously until radio shows the blue LED.
Note: (*) The CLP radio uses proximity pairing. Make sure the headset is close enough to the CLP radio.
Pairing process takes about 14 seconds.
LED Configuration
User Mode LED Status Color
Bluetooth
Pairing Mode
Last connection – Fast blinking blue
Add or erase/add – Solid blue
Pairing
Successfully
Blue/purple blinks for 5 seconds
Bluetooth
Disconnected
Red/purple blinks until the radio
reconnects
Pairing Fail/
Timeout
Red/purple blinks until radio
reconnects
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the
property of their respective owners.
© 2010, 2011 Motorola Solutions, Inc.
All rights reserved.
Printed in Malaysia.
*68012001073*
68012001073-B
A
ccessory
A
u
di
o
Connector
Smart Status
Glow
Volume
Control (+/-)
Power/Battery
Button
Push-to-Talk
(PTT) Button
MENU Button
M
CLP SERIES BLUETOOTH TWO-WAY
RADIO QUICK REFERENCE GUIDE

Motorola CLP series Specifications

General

Brand	Motorola
Model	CLP series
Category	Two-Way Radio
Language	English