Motorola DP3400 - Radio Controls Overview; Channel Selector Knob; On;Off;Volume Control Knob; LED Indicator

Motorola DP3400 - Quick Reference Guide www.ninehundred.co.uk
3
Identifying Radio Controls
English
7
Radio Controls
Channel Selector Knob
On/Off/Volume Control Knob
LED Indicator
3
8
10
11
12
7
6
5
2
1
9
4
1
2
3
Side Button 1*
Push-to-Talk (PTT) Button
Side Button 2*
Side Button 3*
Antenna
Emergency Button*
Speaker
Universal Connector for Accessories
Microphone
* These buttons are programmable.
4
5
6
7
8
9
10
11
12
EMEA_NonDispPort.book Page 7 Friday, June 10, 2011 2:24 PM
Identifying Status Indicators
English
9
Identifying Status Indicators
Your radio indicates its operational status through the following:
LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Audio Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
LED Indicators
The LED indicator shows the operational status of your radio.
Solid red – Radio is transmitting.
Blinking red – Channels are currently busy.
Blinking green – No service.
Audio Tones
Alert tones provide you with audible indications of the radio’s
status or the radio’s response to data received.
LED Indicator
Continuous Tone A monotone sound. Sounds
continuously until termination.
Repetitive Tone A single tone that repeats itself until it is
terminated by the user.
Momentary Tone Sounds only once for a short period of
time defined by the radio.
EMEA_NonDispPort.book Page 9 Friday, June 10, 2011 2:24 PM
Identifying Status Indicators
English
9
Identifying Status Indicators
Your radio indicates its operational status through the following:
LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Audio Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
LED Indicators
The LED indicator shows the operational status of your radio.
Solid red – Radio is transmitting.
Blinking red – Channels are currently busy.
Blinking green – No service.
Audio Tones
Alert tones provide you with audible indications of the radio’s
status or the radio’s response to data received.
LED Indicator
Continuous Tone A monotone sound. Sounds
continuously until termination.
Repetitive Tone A single tone that repeats itself until it is
terminated by the user.
Momentary Tone Sounds only once for a short period of
time defined by the radio.
EMEA_NonDispPort.book Page 9 Friday, June 10, 2011 2:24 PM
All manuals and user guides at all-guides.com